I’ve been feeling the need for both more glamour and more comfort in my wardrobe lately, so my latest make should provide a bit of both.
I’ve succumbed to the jumpsuit trend (despite swearing I wouldn’t two summers ago) and I’ll admit that all the things other people have said about them are true. Secret pyjamas? Check. Potential for dressing up? Check. Lazy afternoon in the park? Check.
After deciding I needed a jumpsuit in my life, there was only one indie pattern in the running: Sallie by Closet Case Patterns. (For a Big 4 version, V9116 also looks promising.) I love the wide-legged trousers, and the way this style combines slouchy Sunday afternoon insouciance with the potential for 1970s-style Saturday night glamour. Can it be worn during the week, do you think?
There was some initial headscratching during the cutting out process. The front and back pattern pieces for the T-shirt top variation are identical, and I couldn’t work out if this would leave enough room up front so I made a top-half toile. It turns out there was enough room for me, but it’ll depend on your FBA size and the stretch percentage of your fabric.
I love the look, and the shape. And there are some tempting hack opportunities. If I were being picky, I’d request a few more notches, and some more detail in parts of the instructions would have made construction easier for me.
It’s a beautiful deep sea green midweight cotton jersey with some spandex content from Fabrics Galore, bought back in the spring at an NEC sewing event. With just enough stretch, it has the structure I wanted through the bottom half, and it wasn’t too much of a pain to cut out.
I started with a size 14 on top and graded out to a 16 below the waist. The identical front and back pieces mean it does have to stretch at the front so there’s some spare fabric at the back and if I were making another one, I’d probably do a small sway back adjustment.
I lengthened the bodice by 1″ and the crotch length by 2″ to ensure that the waist seam ended up on the waist.
If you have a waist, I think you have to get this spot on, or at least very close for it to be wearable. If you’re not sure whether you’ve got enough length, add plenty of length in both these places, and tack/baste both the stitching for the casing and the waist seam to begin with so you can remove any extra length after a try-on. Remember that the weight of the trousers will pull on the top, stretching it downwards.
Although this is a fairly straightforward project, and could be attempted by anyone who’s made one knit garment before, there are one or two places where things get tricky, and I made a few mistakes along the way.
I’d really recommend labelling your front, back, front lining and back lining pieces clearly, especially if it’s hard to tell the right and wrong sides of your fabric apart.
If you’re making the kimono-sleeved t-shirt version, use your regular machine rather than your overlocker to stitch the side seams on the top. You have to stop/start exactly at the circle mark to get the underarm seams neat.
And if you’re a pear-shape grading up a size on the bottom, remember that you’ll have to get the neck opening over your hips to get in and out, so it’s best not to narrow the shoulders too much – the neck tie will stop it falling off your shoulders.
In the end
This is a project that’s divided the Wardrobe household. I love it. But Mr Wardrobe hates it. He looked distinctly worried when I said I might wear it for our next night out together.
So where do you stand on jumpsuits? Throwback, fad, or comfy chic?
And apart from wedges, what shoes would you pair with this for a more casual look?
Update: I’ve joined Allie J’s social sew for August, and included this as my ‘hot, hot heat’ make. The social sew is open until the end of the month, so if you’re sewing some warm weather gear, join us.