Coverstitch? Twin needles? Zigzag?
What’s the best way to hem a knit garment like a T-shirt or a jersey dress? From what I’ve learnt so far your options are:
If you’re lucky enough to have a coverstitch machine this seems to be the way to go. You press up your hem, and then the coverstitch finishes the raw edge and stitches the hem in one go. It gives that RTW twin needle finish on the outside and because of the differential feed you can get it lovely and stretchy so you won’t split your stitches taking the garment on and off. If only I could justify buying one…
Overlock plus twin needle
This is the one I’ve used the most. It gives a slightly stretchy finish because the bobbin thread zigs and zags between the two top threads, but it probably won’t stretch as much as the original fabric. First you overlock the raw edge and press up your hem. You can also stabilise the hem allowance to avoid a twisted, puckered or ridged finish.
Then fit a ballpoint twin needle in your ordinary sewing machine, use your walking foot, a straight stitch setting, and topstitch the hem in place from the right side.
(If you have a really old sewing machine, like my Singer 201K, that only has a straight stitch, then you may not have a footplate that will take a twin needle, but any machine that has a built-in a zigzag function should be fine. I used my mother-in-law’s 1960s Singer to hem my Moneta dress. If there’s no second spool, then put your two top threads onto bobbins and then you can stack them on top of each other on your spool pin.)
If you’re getting a ridge between the two lines of stitching, then a stabiliser should help, and you can also try playing around with the tension. Lots of people recommend stretchy woolly nylon for the bobbin thread, but I haven’t tried this yet.
If you don’t have an overlocker
You don’t have to overlock the edge before you press it up, you can still do a twin needle hem without this step, but in this case I would definitely use a stabiliser right up to the raw edge – and pick one that won’t wash out. A permanent stabiliser may limit the stretch a little, but that’s better than the raw edge curling back over the hemming stitch and creating a lump there. You might also choose to use an overedge or zigzag stitch to finish the raw edge for neatness.
If you don’t want to buy a ballpoint twin needle…
…because it’s an awful moment when you break one and have to part with another £4, then you can also topstitch the hem with a zigzag stitch, or a stretch stitch. This will stretch a little, but like the twin needle finish, not a lot. Some people are sniffy about how this finish looks, but I quite like the variation. I tried this for my latest T-shirt (which I’ll hopefully post later this week when the weather brightens enough to take pictures).
Can you help me with any of my unsolved questions?
- Is a coverstitch machine so amazing that I should blow the budget and get one? Or are they quite fiddly and hard to use?
- What’s the best stabiliser to use for knit hems? Spray-in starch, wash-away, knit interfacing or something else?
- I’ve read that you can also use a rolled hem. Has anyone tried this? What sort of fabric would this work best on?
- Where can you get woolly nylon thread in the UK?